Leak Detection & Repair Burlington, ON
A damp carpet edge, unexplained meter movement, or water stain may point to a hidden leak, but the visible symptom does not always identify the failing pipe. If piping runs behind finished walls or below a slab, ask how the investigation will narrow the affected section before opening surfaces. Pressure isolation, acoustic equipment, and thermal imaging may each help in suitable conditions. Photos, meter readings, and the timing of symptoms help determine what to test and whether access is needed.
Is a hidden leak suspected behind a wall or below a slab?
Photograph stains and note meter readings, fixture use, and when symptoms appear. Ask how testing will isolate the pipe before deciding where access is needed.
Isolate the Suspected Pipe Section
Ask whether pressure testing can compare sections of the plumbing system before opening a wall or ceiling. Record which fixtures were running and any meter movement during the investigation. A section that holds pressure differs from one that does not, helping narrow the likely area and avoid unnecessary access when the system layout permits isolation.
Assess Under-Slab Location Methods
If a leak may be below a slab, ask whether warm-water lines make thermal imaging useful and whether acoustic equipment can help locate escaping water. Each method has limits and depends on the pipe and site conditions. Confirm how a suspected location will be marked and what opening size or concrete work may be required before approving access.
Separate the Immediate Repair From Wider Concerns
Ask for the suspected failure point and the evidence supporting it before choosing a repair scope. If a fitting on polybutylene has failed, ask whether nearby accessible sections show similar concerns, but distinguish that assessment from the immediate repair. The condition and accessibility of other piping determine whether further work is a separate decision.
Explore Other Plumbing Services
Describe Your Leak Detection & Repair Request
Describe your leak detection & repair request and property in the form so the scope can be confirmed before scheduling.